ST. PETERSBURG INTERNATIONAL GAS FORUM
IMG-20241009-WA0004   

October 2024

RSS - made at NPP Energia, Tver!
IMG-20240910-WA0049
On the rig during testing
Key element

trubka

Neutron tubes developed by RPE Energiya, LLC (ООО «НПП Энергия») and FSUE Integrated Plant “Electrohimpribor” (ФГУП «Комбинат «Электрохимприбор»)

 

Pulsed multichannel spectrometric tool PIMS-76

pims_76Designed to determine geological material composition, element weight content, first of all, carbon and oxygen content, by recording gamma ray spectrum of inelastic scattering and radiative capture of neutrons, induced by pulsed neutron generator.

Applied in wells with open or cased hole with any circulation fluid type.

Active tasks:

  • assessment of current oil saturation factor (C/O logging);
  • determination of water intrusion intervals;
  • lithologic sectional layering.

Probe is equipped with a compartment to install pulsed neutron source (generator) and with gamma radiation scintillation detector.

Measured parameters Range Accuracy
Hydrocarbon volume content 2÷40 % ±2 %
Energy scale stability over the hydrogen (2.230 MeV) and iron (7.650 MeV) peaks, at least 30 keV
Integral nonlinearity of energy scale within the range of [1000,8000] keV, max 3 %
Vertical resolution 50 cm
Exploration area radius 
*in oil and gas wells
20÷50* cm

 

General technical specifications
Tool overall length, mm 3373 max
Tool diameter, mm 76 max
Total tool weight, kg 61 max
Maximum ambient temperature, °C 120  
Maximum hydrostatic pressure, MPa 80  
Detector unit BGO, mm 41×130  
Neutron frequency of oscillation, kHz 0.5÷10  
Neutron pulse ratio 5  
Oscillator operational life, at neutron output of 108 n/sec, hours 250  min
Energy channel number 512  min
Energy spectrum number per depth quanta 12  
Time-interval analyzer channel number 12 min
Combinability terminal  
Position in well free